Aqara Wireless Mini Switch T1 (WB-R02D) – compatibility & pairing guide
The Aqara Wireless Mini Switch T1 (model WB-R02D) is a 45 × 45 mm battery button. In the Aqara app it offers single press, double press and long press; in Zigbee2MQTT it reports single, double, triple, quadruple and quintuple presses as well as hold and release, so one button can control several scenes.
Branding: the device and box may carry a different brand name, shown as small grey text on the side of the device. Hardware, model number, Zigbee stack and functionality are identical to the Aqara original.

Compatibility at a glance
| Platform | Works? | What you need | Notes |
|---|---|---|---|
| Aqara Home app | Yes | Aqara Zigbee 3.0 hub (e.g. Hub M3, M2, M1S Gen 2, E1, Camera Hub G3 / G2H Pro) | Full feature set, automations, firmware updates |
| Apple Home (HomeKit) | Yes, via Aqara hub | HomeKit-compatible Aqara hub | Appears as: Programmable button (single, double and long press) |
| Matter (Google Home, Alexa, SmartThings, Apple Home) | Yes, via Aqara hub | Matter-compatible Aqara hub (Matter bridge) + the ecosystem's Matter controller | Features depend on hub firmware and controller |
| Home Assistant – ZHA | Yes | Zigbee coordinator (USB dongle) | Device ID lumi.remote.b1acn02 |
| Zigbee2MQTT | Yes | Zigbee coordinator + Zigbee2MQTT | Model WXKG13LM |
| deCONZ / Phoscon | Not confirmed | ConBee / RaspBee | Listed on zigbee.blakadder.com |
What the sensor reports (Zigbee2MQTT)
action (single, double, triple, quadruple, quintuple, hold, release, many)batteryvoltage
Pairing with an Aqara hub (Aqara Home app)
- Set up your Aqara Zigbee 3.0 hub in the Aqara Home app.
- Tap "+" › Add device, choose the product and select the hub.
- Press and hold the button until the blue LED starts blinking, then release. If the interview stalls, press the button about once per second until pairing completes.
- Name the device, assign a room and, if you use Apple Home, it appears there automatically through the hub.
Pairing with Zigbee2MQTT
- Click "Permit join (All)" in the Zigbee2MQTT front end.
- Press and hold the button until the blue LED starts blinking, then release. If the interview stalls, press the button about once per second until pairing completes.
- Wait until the interview has completed and the device shows as supported (WXKG13LM).
- Rename it and use the exposed values in Home Assistant via MQTT discovery.
Pairing with Home Assistant (ZHA)
- Settings › Devices & services › Zigbee Home Automation › Add device.
- Press and hold the button until the blue LED starts blinking, then release. If the interview stalls, press the button about once per second until pairing completes.
- Keep the device awake until ZHA finishes the configuration; it should be identified as lumi.remote.b1acn02.
- If no entities appear, update Home Assistant and the coordinator firmware, factory-reset the device and pair again close to the coordinator.
Tips & known issues
- Typical uses: scene button by the bed, doorbell, emergency/call button for elderly relatives, arming and disarming an alarm, or disarming an Aqara siren.
- In Home Assistant, trigger automations on the action event (Zigbee2MQTT) or on the device triggers in ZHA.
- OTA firmware updates are supported in Zigbee2MQTT.
- The battery is a CR2032 coin cell; replacing it does not normally require re-pairing.
Battery, battery replacement & reset
Battery: 1 × CR2032 (included).
Factory reset / re-pairing: Press and hold the button until the blue LED starts blinking, then release. If the interview stalls, press the button about once per second until pairing completes.
Frequently asked questions
Does the Aqara Mini Switch T1 work with Home Assistant?
Yes. Zigbee2MQTT supports it as WXKG13LM and ZHA recognises it as lumi.remote.b1acn02.
How many actions does the Mini Switch T1 support?
Single, double and long press in the Aqara app and Apple Home. Zigbee2MQTT also reports triple to quintuple presses, hold and release.
Can I use it as a doorbell?
Yes. Combine it with an Aqara hub that has a speaker, or with any siren or speaker in Home Assistant. It is not weatherproof, so mount it in a sheltered place.
Buy the Aqara Wireless Mini Switch T1
€8.45 per unit from 20 units, €6.95 from 100 and €5.45 from 500 (incl. VAT, plus DHL shipping).
Packs: 20-pack · 100-pack · 500-pack
Device and box may carry a different brand name (small grey text on the side); hardware, model number, Zigbee stack and functionality are identical to the Aqara original.
Sources: zigbee2mqtt.io device page, zigbee.blakadder.com, zha-device-handlers and the Aqara product page. Checked 18 Nov 2026. Feature support in third-party software can change with new versions. zigbee2mqtt.io/WXKG13LM · aqara.com
More guides
- Aqara Door and Window Sensor T1 – Compatibility & pairing guide
- Aqara Motion Sensor P1 – Compatibility & pairing guide
- Aqara Smoke Detector – Compatibility & pairing guide
- Aqara Temperature and Humidity Sensor T1 – Compatibility & pairing guide
- Which Aqara sensor do I need?
- Using Aqara sensors without the Aqara hub
- Aqara wholesale: bulk prices from 20 units