Aqara Smoke Detector (SD-S01D) – compatibility & pairing guide
The Aqara Smoke Detector (model SD-S01D) is a photoelectric smoke alarm certified to EN 14604 according to Aqara's EU Declaration of Conformity. It sounds its own 85 dB siren without any hub, and over Zigbee 3.0 it adds phone notifications, automations and grouping. Aqara rates the CR17450 lithium battery for up to 10 years (tested with one 5-minute alarm per month).
Branding: the device and box may carry a different brand name, shown as small grey text on the side of the device. Hardware, model number, Zigbee stack and functionality are identical to the Aqara original.

Compatibility at a glance
| Platform | Works? | What you need | Notes |
|---|---|---|---|
| Aqara Home app | Yes | Aqara Zigbee 3.0 hub (e.g. Hub M3, M2, M1S Gen 2, E1, Camera Hub G3 / G2H Pro) | Full feature set, automations, firmware updates |
| Apple Home (HomeKit) | Yes, via Aqara hub | HomeKit-compatible Aqara hub | Appears as: Smoke sensor |
| Matter (Google Home, Alexa, SmartThings, Apple Home) | Yes, via Aqara hub | Matter-compatible Aqara hub (Matter bridge) + the ecosystem's Matter controller | Features depend on hub firmware and controller |
| Home Assistant – ZHA | Yes | Zigbee coordinator (USB dongle) | Device ID lumi.sensor_smoke.acn03 |
| Zigbee2MQTT | Yes | Zigbee coordinator + Zigbee2MQTT | Model JY-GZ-01AQ |
| deCONZ / Phoscon | Not confirmed | ConBee / RaspBee | Listed on zigbee.blakadder.com |
What the sensor reports (Zigbee2MQTT)
smokesmoke_densityselftestbuzzerlinkage_alarmheartbeat_indicatorbatteryvoltage
Pairing with an Aqara hub (Aqara Home app)
- Set up your Aqara Zigbee 3.0 hub in the Aqara Home app.
- Tap "+" › Add device, choose the product and select the hub.
- Press the button on the front 3 times in quick succession. Pairing may fail if the battery is low.
- Name the device, assign a room and, if you use Apple Home, it appears there automatically through the hub.
Pairing with Zigbee2MQTT
- Click "Permit join (All)" in the Zigbee2MQTT front end.
- Press the button on the front 3 times in quick succession. Pairing may fail if the battery is low.
- Wait until the interview has completed and the device shows as supported (JY-GZ-01AQ).
- Rename it and use the exposed values in Home Assistant via MQTT discovery.
Pairing with Home Assistant (ZHA)
- Settings › Devices & services › Zigbee Home Automation › Add device.
- Press the button on the front 3 times in quick succession. Pairing may fail if the battery is low.
- Keep the device awake until ZHA finishes the configuration; it should be identified as lumi.sensor_smoke.acn03.
- If no entities appear, update Home Assistant and the coordinator firmware, factory-reset the device and pair again close to the coordinator.
Tips & known issues
- The siren works stand-alone. The Zigbee connection adds remote alerts; it does not replace regular testing with the button on the front.
- Device alarm grouping (one detector triggers all others) is an Aqara Home feature and needs an Aqara hub. In Home Assistant you can build the same with an automation, using the buzzer and linkage_alarm settings that Zigbee2MQTT exposes.
- Zigbee2MQTT notes that a ConBee III coordinator may not receive the alarm reports, and that detector firmware version 21 could beep only once (that version was retracted). Test the alarm path after pairing.
- Third-party platforms can increase power use and show inaccurate battery levels, according to Aqara.
Battery, battery replacement & reset
Battery: 1 × CR17450 (included). Aqara states a battery life of up to 10 years; it depends on use and settings.
Factory reset / re-pairing: Press the button on the front 3 times in quick succession. Pairing may fail if the battery is low.
Frequently asked questions
Does the Aqara Smoke Detector work without a hub?
Yes, as a normal stand-alone smoke alarm with its own siren. Notifications, automations and grouping need an Aqara hub or a Zigbee coordinator with Home Assistant.
Is the Aqara Smoke Detector supported in Home Assistant?
Yes. Zigbee2MQTT supports it as JY-GZ-01AQ (smoke, smoke density, self-test, buzzer, battery) and ZHA recognises it as lumi.sensor_smoke.acn03.
Which standard does it meet?
EN 14604, the European standard for smoke alarm devices, according to Aqara's EU Declaration of Conformity.
Buy the Aqara Smoke Detector
€19.95 per unit from 20 units, €16.45 from 100 and €13.45 from 500 (incl. VAT, plus DHL shipping).
Packs: 20-pack · 100-pack · 500-pack
Device and box may carry a different brand name (small grey text on the side); hardware, model number, Zigbee stack and functionality are identical to the Aqara original.
Sources: zigbee2mqtt.io device page, zigbee.blakadder.com, zha-device-handlers and the Aqara product page. Checked 18 Nov 2026. Feature support in third-party software can change with new versions. zigbee2mqtt.io/JY-GZ-01AQ · aqara.com
More guides
- Aqara Door and Window Sensor T1 – Compatibility & pairing guide
- Aqara Motion Sensor P1 – Compatibility & pairing guide
- Aqara Temperature and Humidity Sensor T1 – Compatibility & pairing guide
- Aqara Wireless Mini Switch T1 – Compatibility & pairing guide
- Which Aqara sensor do I need?
- Using Aqara sensors without the Aqara hub
- Aqara wholesale: bulk prices from 20 units