Aqara Temperature and Humidity Sensor T1 (TH-S02D) – compatibility & pairing guide
The Aqara Temperature and Humidity Sensor T1 (model TH-S02D) measures temperature (±0.3 °C), relative humidity (±3 %) and air pressure in a 36 × 36 × 9 mm housing powered by one CR2032 cell. Typical uses are heating control, mould prevention, server and storage rooms, fridges and greenhouses.
Branding: the device and box may carry a different brand name, shown as small grey text on the side of the device. Hardware, model number, Zigbee stack and functionality are identical to the Aqara original.

Compatibility at a glance
| Platform | Works? | What you need | Notes |
|---|---|---|---|
| Aqara Home app | Yes | Aqara Zigbee 3.0 hub (e.g. Hub M3, M2, M1S Gen 2, E1, Camera Hub G3 / G2H Pro) | Full feature set, automations, firmware updates |
| Apple Home (HomeKit) | Yes, via Aqara hub | HomeKit-compatible Aqara hub | Appears as: Temperature + humidity sensor (air pressure is not shown in Apple Home) |
| Matter (Google Home, Alexa, SmartThings, Apple Home) | Yes, via Aqara hub | Matter-compatible Aqara hub (Matter bridge) + the ecosystem's Matter controller | Features depend on hub firmware and controller |
| Home Assistant – ZHA | Yes | Zigbee coordinator (USB dongle) | Device ID lumi.sensor_ht.agl02 |
| Zigbee2MQTT | Yes | Zigbee coordinator + Zigbee2MQTT | Model WSDCGQ12LM |
| deCONZ / Phoscon | Not confirmed | ConBee / RaspBee | Listed on zigbee.blakadder.com |
What the sensor reports (Zigbee2MQTT)
temperaturehumiditypressuredevice_temperaturebatteryvoltage
Pairing with an Aqara hub (Aqara Home app)
- Set up your Aqara Zigbee 3.0 hub in the Aqara Home app.
- Tap "+" › Add device, choose the product and select the hub.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Name the device, assign a room and, if you use Apple Home, it appears there automatically through the hub.
Pairing with Zigbee2MQTT
- Click "Permit join (All)" in the Zigbee2MQTT front end.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Wait until the interview has completed and the device shows as supported (WSDCGQ12LM).
- Rename it and use the exposed values in Home Assistant via MQTT discovery.
Pairing with Home Assistant (ZHA)
- Settings › Devices & services › Zigbee Home Automation › Add device.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Keep the device awake until ZHA finishes the configuration; it should be identified as lumi.sensor_ht.agl02.
- If no entities appear, update Home Assistant and the coordinator firmware, factory-reset the device and pair again close to the coordinator.
Tips & known issues
- Zigbee2MQTT exposes temperature, humidity and pressure, with calibration and precision options for each.
- The device likely does not work with coordinator firmware older than 2021.
- Aqara/Xiaomi end devices may drop off when they connect through some third-party Zigbee routers (Zigbee2MQTT names Centralite, GE, Iris, Ledvance, Legrand, OSRAM, Sylvania, SmartThings and Securifi). Re-pair close to the coordinator if a sensor stops reporting.
- For mould prevention, alert when relative humidity stays above about 60 % for several hours.
Battery, battery replacement & reset
Battery: 1 × CR2032 (included).
Factory reset / re-pairing: Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
Frequently asked questions
Does the Aqara T1 temperature sensor also measure air pressure?
Yes. It reports temperature, humidity and air pressure (30–110 kPa). Apple Home shows only temperature and humidity.
Is the TH-S02D supported by Home Assistant?
Yes, by Zigbee2MQTT (model WSDCGQ12LM) and ZHA (device lumi.sensor_ht.agl02).
How do I replace the battery?
Open the back cover and replace the CR2032 coin cell. If the sensor then stops reporting, re-pair it.
Buy the Aqara Temperature and Humidity Sensor T1
€8.95 per unit from 20 units, €6.95 from 100 and €5.95 from 500 (incl. VAT, plus DHL shipping).
Packs: 20-pack · 100-pack · 500-pack
Device and box may carry a different brand name (small grey text on the side); hardware, model number, Zigbee stack and functionality are identical to the Aqara original.
Sources: zigbee2mqtt.io device page, zigbee.blakadder.com, zha-device-handlers and the Aqara product page. Checked 18 Nov 2026. Feature support in third-party software can change with new versions. zigbee2mqtt.io/WSDCGQ12LM · aqara.com
More guides
- Aqara Door and Window Sensor T1 – Compatibility & pairing guide
- Aqara Motion Sensor P1 – Compatibility & pairing guide
- Aqara Smoke Detector – Compatibility & pairing guide
- Aqara Wireless Mini Switch T1 – Compatibility & pairing guide
- Which Aqara sensor do I need?
- Using Aqara sensors without the Aqara hub
- Aqara wholesale: bulk prices from 20 units