Aqara Motion Sensor P1 (MS-S02) – compatibility & pairing guide
The Aqara Motion Sensor P1 (model MS-S02) is a battery-powered PIR motion sensor with a built-in light sensor, a 170° field of view and a range of about 7 m. Its detection interval (1–200 s) and sensitivity are adjustable, and the manufacturer rates the two CR2450 cells for up to 5 years.
Branding: the device and box may carry a different brand name, shown as small grey text on the side of the device. Hardware, model number, Zigbee stack and functionality are identical to the Aqara original.

Compatibility at a glance
| Platform | Works? | What you need | Notes |
|---|---|---|---|
| Aqara Home app | Yes | Aqara Zigbee 3.0 hub (e.g. Hub M3, M2, M1S Gen 2, E1, Camera Hub G3 / G2H Pro) | Full feature set, automations, firmware updates |
| Apple Home (HomeKit) | Yes, via Aqara hub | HomeKit-compatible Aqara hub | Appears as: Motion sensor + light sensor |
| Matter (Google Home, Alexa, SmartThings, Apple Home) | Yes, via Aqara hub | Matter-compatible Aqara hub (Matter bridge) + the ecosystem's Matter controller | Features depend on hub firmware and controller |
| Home Assistant – ZHA | Yes | Zigbee coordinator (USB dongle) | Device ID lumi.motion.ac02 |
| Zigbee2MQTT | Yes | Zigbee coordinator + Zigbee2MQTT | Model RTCGQ14LM |
| deCONZ / Phoscon | Confirmed (community) | ConBee / RaspBee | Listed on zigbee.blakadder.com |
What the sensor reports (Zigbee2MQTT)
occupancyilluminancemotion_sensitivitydetection_intervaltrigger_indicatordevice_temperaturebatteryvoltage
Pairing with an Aqara hub (Aqara Home app)
- Set up your Aqara Zigbee 3.0 hub in the Aqara Home app.
- Tap "+" › Add device, choose the product and select the hub.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Name the device, assign a room and, if you use Apple Home, it appears there automatically through the hub.
Pairing with Zigbee2MQTT
- Click "Permit join (All)" in the Zigbee2MQTT front end.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Wait until the interview has completed and the device shows as supported (RTCGQ14LM).
- Rename it and use the exposed values in Home Assistant via MQTT discovery.
Pairing with Home Assistant (ZHA)
- Settings › Devices & services › Zigbee Home Automation › Add device.
- Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
- Keep the device awake until ZHA finishes the configuration; it should be identified as lumi.motion.ac02.
- If no entities appear, update Home Assistant and the coordinator firmware, factory-reset the device and pair again close to the coordinator.
Tips & known issues
- Zigbee2MQTT exposes motion_sensitivity, detection_interval and trigger_indicator. Press the pairing button right before changing a setting, otherwise the sleeping sensor will not receive it.
- The device likely does not work with coordinator firmware older than 2021; update the coordinator first.
- Use illuminance to switch lights only when it is dark; the occupancy_timeout option in Zigbee2MQTT controls when "no motion" is reported.
- Firmware updates over the air (OTA) are supported in Zigbee2MQTT and via the Aqara app.
Battery, battery replacement & reset
Battery: 2 × CR2450 (included). Aqara states a battery life of up to 5 years; it depends on use and settings.
Factory reset / re-pairing: Press and hold the reset button for about 5 seconds until the blue LED starts blinking. If it does not join, try a single short press.
Frequently asked questions
Does the Aqara Motion Sensor P1 work with Zigbee2MQTT?
Yes, as model RTCGQ14LM. It exposes occupancy, illuminance, motion sensitivity, detection interval, trigger indicator, device temperature and battery.
How long does the P1 battery last?
Aqara states up to 5 years with the two included CR2450 cells. Actual life depends on how often motion is detected and on the settings.
What is the difference between Motion Sensor P1 and P2?
The P1 is a Zigbee 3.0 device. The P2 uses Thread/Matter instead and needs a Thread border router rather than a Zigbee hub or coordinator.
Buy the Aqara Motion Sensor P1
€8.95 per unit from 20 units, €7.45 from 100 and €5.95 from 500 (incl. VAT, plus DHL shipping).
Packs: 20-pack · 100-pack · 500-pack
Device and box may carry a different brand name (small grey text on the side); hardware, model number, Zigbee stack and functionality are identical to the Aqara original.
Sources: zigbee2mqtt.io device page, zigbee.blakadder.com, zha-device-handlers and the Aqara product page. Checked 18 Nov 2026. Feature support in third-party software can change with new versions. zigbee2mqtt.io/RTCGQ14LM · aqara.com
More guides
- Aqara Door and Window Sensor T1 – Compatibility & pairing guide
- Aqara Smoke Detector – Compatibility & pairing guide
- Aqara Temperature and Humidity Sensor T1 – Compatibility & pairing guide
- Aqara Wireless Mini Switch T1 – Compatibility & pairing guide
- Which Aqara sensor do I need?
- Using Aqara sensors without the Aqara hub
- Aqara wholesale: bulk prices from 20 units